Tecno-gaz MasterFlux Smart Mode D'emploi page 51

DOCUMENTS allows to:
display the last sedations stored (max. 99)
‐
export to USB stick
‐
DISPLAY is used to:
set the volume of cylinders used and do a
‐
cylinder reset
set the autonomy display (see 4.1)
‐
set the suction flow display (in case of
‐
active suction)
CONNECTION is used to set up the WIFI
connection, it is necessary to enter the network
name and password.
SERVICE
INFORMATION displays information
‐
about the device (e.g. serial number)
PERIPHERAL CONTROL is used to
‐
control and view individual components
(access for authorised technicians only)
SERVICING AND MAINTENANCE is
‐
used to record (for authorised technicians
only) and display the maintenance carried
out.
16 - 33
ENGLISH