Palazzetti ECOFIRE Serie Mode D'emploi page 44

6.1.1 Installation without base frame
It is possible to install the built-in stove with front air
installation on the surface of a replace.
Procedure:
1) Slide the stove off the base(Fig. 6.1.7);
2) Use plugs to position and fasten the base to
the surface of the replace (Fig. 6.1.8);
3) Re-install the telescopic guides and re-insert
the stove in the base (Fig. 6.1.9);
4) Arrange the pellet chute according to needs
using commercially available materials to be
adapted as the installer deems t.
be carved in order to allow the circulation of fresh
air to avoid overheating of the appliance.
44
INSTALLATION
Fig. 6.1.7
Fig. 6.1.8 Fig. 6.1.9
00 477 3370 - 09/2014 - PN - Italy