Quick RDS 1560 Mode D'emploi page 20

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

PROGRAMMING
GB
ENTRY TO THE SECONDARY MENU:
Once you select a function in the main menu by pressing the "ENTER" button you will enter the secondary menu.
The selected options are marked by the symbol "
p
q
Use the keys
and
desired choice.
Use the key "ENTER" to select the desired option (the
If "ENTER" is pressed on a selected entry, the user exits the secondary menu.
Secondary menu entrance screenful:
æ
1 nd line: FUNCTION
P
2 nd line: OPTIONS
SECONDARY MENU:
Refer to the user's manual of the SBC NRG battery charger for the description of the following functions:
Battery type
Monitor mode
Float thresho
Max current
Silent mode
The settings chosen and confirmed in these functions will modify the settings on the battery charger the instrument
refers to (same group and same priority). In the same way, the settings chosen and confirmed on the battery charger
will modify the settings on the RDS 1560 instrument.
RESET MENU
RESET
NO *
* Default value
YES
This function allows to reset the battery charger even if manual reset errors are present. Of course, if the cause of the
problem hasn't been removed, the problem will occur again.
INSTRUMENT'S CONFIGURATION MENU - CONFIG RDS
The parameters which can be selected and changed in this menu only concern the remote panel RDS 1560.
All applied changes won't be transferred to the battery charger the instrument refers to.
LANGUAGE
This function allows to choose the language of the main and secondary menu.
CAN GROUP
This function allows to attribute to the instrument the same network group of the NRG battery charger connected to it.
Refer to the SBC NRG battery charger user's manual.
Ensure that you assign to the instrument the same group of the battery charger of which you want to display the data.
CAN PRIORITY
This function allows to attribute to the instrument the same priority of the NRG battery charger connected to it.
Refer to the SBC NRG battery charger user's manual.
Ensure that you assign to the instrument the same priority of the battery charger of which you want to display the data.
20
(UP and DOWN) to scroll the options inside the secondary menu and to position on the new
B A T T E R Y T Y P e
O P E N L i q u i d
".
symbol will appear).
q
p
q
The symbols
and
show the scrolling
direction (UP and DOWN) for the options se-
lection in the secondary menu.
RDS 1560 - REV001A

Publicité

Table des Matières
loading

Table des Matières