Before Engaging The Electric Drive Unit - Garant GridLine 925421 Mode D'emploi

CAUTION
Workbench tipping
Risk of injury to hands, feet and body due to unrestrained objects falling and risk of the workbench
tipping due to incorrect loading.
» Wear safety shoes and safety gloves.
» Do not store pointed or other workpieces without restraint.
» Do not open several drawers at once.
» Ensure during transport that no objects are present on the worktop.
» Ensure during movement and transport that all drawers and cupboard doors are closed and
locked.
» Comply with the maximum load capacity of the individual drawers and storage shelves.
» Comply with the maximum load capacity of the workbench.
NOTICE
Low ground clearance
Damage to the drive unit due to contact with the ground because of low ground clearance.
» When the drive unit is retracted, do not run over any obstacle of height greater than 30 mm.
» When the drive unit is extended, do not run over any obstacle of height greater than 15 mm.

5.1. BEFORE ENGAGING THE ELECTRIC DRIVE UNIT

D
(Fig. )
1. Make sure the paths for movement and transport are clear.
» No persons or objects must be present in the direction of travel of the workbench.
» Ensure the path is compatible with the workbench ground clearance of 15 mm.
2. Remove loose objects from the worktop.
3. Turn the key on the battery to the ON position.
4. Close the drawers and the door.
5. Release the parking brakes on both castors.
6. Press the power switch on the control handle.
» The control system is initialised.
» The system LED lights up red.
» After initialisation the system LED lights up green.
» The workbench is now ready for use.
www.hoffmann-group.com
en
93