Receiver (Urr) - Jay Electronique UR Série Notice Technique D'installation Et D'utilisation

4.2- URR receiver
Housing
Material
Tightness
Radio
Antenna
Frequencies
Sensitivity
(with 2 safety relays, 1 "Horn" relay and 6 function relays activated)
DC
AC
Output response time
Passive stop
Active stop
On startup
On control
Cable lead-out
Power supply and IR option
Outputs
Protection class
Rated impulse voltage strength
Pollution degree
Storage temperature range
Operating temperature range
Weight
Indicator light
Protection of power supply
(1)= The cover can be replaced by a plastic cable gland (standard PE) type M16 mounted in its place.
The UDF infrared module is systematically delivered with one plastic M16 cable gland.
A large label in the housing cover gives the following information to facilitate configuration and
maintenance of the system:
- connection point numbers
- wiring indication
- fuse characteristics
- indicator light functions
- table showing the "Buttons/Relays/Functions" configurations for the application and the
interlocking configuration.
UR - 323245J
ABS, Grey
IP65
complies with ETS 300 220
¼ wave, integrated in housing, can be unplugged as an
accessory with ref : OWR01 .
64 programmable 433.1 to 434.675MHz
< -100dBm
Power supply and maximum consumption
12VDC -5% to +30% , 550 mA
24VDC -20% to +20% , 430 mA
24VAC -15% to +10% , 1 A
48VAC -15% to +10% , 475 mA
115VAC -15% to +10% , 200 mA
230VAC -15% to +10% , 90 mA
1,15 s max.
0,16 s max.
0,50 s max.
0,07 s max.
1 M16 cap (cable diameter : 5mm to 7mm) (1)
1 M25 plastic cable gland (cable dia. : 14mm to 20mm)
reinforced insulation
6kV at 2000 m altitude
2 internal, 3 external
-30° to +70°C
-20°C to +50°C
1,1 Kg approx,
1 green LED = Power ON
1 red LED + 1 green LED for diagnostic
1 red LED per relay
- Against polarity inversions for DC versions
- Against overcurrents by fuse
DE EN FR
- 59 -