Accessories; Technical Characteristics; Transmitter (Ure); Identity Code - Jay Electronique UR Série Notice Technique D'installation Et D'utilisation

4- Technical characterisitcs
4.1- URE transmitter
Housing
Material
Tightness
Radio
Carrier
Frequencies
Frequency band
HF power
Average range
Battery
Type
Charge / discharge cycles
Complete charging time
Endurance
For typical use of function buttons
Endurance after a 10 min. charge w hen
battery is discharged
Storage temperature range
Charging temperature range
Caution : charging outside this tem perature range can be dangerous for the battery
Operating temperature range
Attachment when idle
Weight (with battery)
Dimensions
Indicator lights
* = Range will vary according to environment conditions of transmitter and reception antenna

4.1.1- Identity code

The transmitter and receiver are linked by an identity code.
A receiver can only recognise and execute commands generated by the associated
transmitter (with electronic key containing the receiver identity code).
- The receiver identity code is a unique, fixed code (it can't be reprogrammed).
This identity code is contained in the electronic key and can be copied to a transmitter
by a trained and authorized user (see 6.3.4)
Identity codes have 65536 different combinations.
UR - 323245J
ABS, yellow
IP65
complies with ETS 300 220
UHF, frequency modulated (FM)
64 programmable frequencies
433.1 to 434.675 MHz
< 10 mW (license not required) , built-in antenna
230 m in typical industrial environment *
600 m in unobstructed area
Lithium
300 cycles min, (without damaging battery capacity)
2h30, at +20°C
(if battery totally discharged)
50 H at 50% utilisation at +20°C
40 H at 50% utilisation at -20°C
around 1 h transmission time available
-20°C to +50°C
0°C to +40°C
-20°C to +50°C
Wall (fastening hook, support charger) or on belt by
fastening clip
240 g
46 x 78 x 143 mm
1 orange LED "Battery low" and "Diagnostic"
1 green LED "ON", "Battery charging" and
"Diagnostic"
(metal frameworks, walls ... ).
DE EN FR
- 55 -