Dead Man» Function (Automatic Shutdown Of Transmitter Ure) - Jay Electronique UR Série Notice Technique D'installation Et D'utilisation

4.1.6- "Dead man" function
The "dead man" safety function deactivates the URE transmitter (radio transmission cut off) when the
pushbuttons (BPSV, BPDV and "On/Horn") have not been actuated for a duration of N minutes or
seconds.
The N parameter is user-configurable and can take the values 01 to 98 minutes or seconds.
In the standard configuration, the time unit is in minutes. On delivery, the duration is defined for 4
minutes.
The temporization unit can be modified by following the procedure described in §6.3.3
- If the time unit is in minutes and the N value configured is 99 minutes, the transmitter considers
that the dead man duration is infinite (until the battery is entirely discharged).
- If the time unit is in seconds and the N value configured is 99 seconds, the transmitter will be
deactivated after 99 seconds if no action has been performed on the transmitter.
Restarting the transmitter after the "Dead man" function has been activated:
- Press the stop palmswitch button on the transmitter.
- Unlock the stop palmswitch button on the transmitter.
- Press the green "On/Horn" button (If option "starting up by IR validation" chosen, the operator has to
aim at the infrared UDF module).
Changing the dead man duration or temporization unit :
The dead man duration or unit N can be modified by a trained operator by performing the procedure
described in § 6.3.3.
NB : Rotary switches COM2, COM3, and COM3R do not act on the "Dead man" function The
manipulation of these types of buttons does not rearm the temporization).
If the operator has to use switches during a long period, the temporization must be lengthened
or removed by programming, or the operator will have to rearm the temporization by pressing
regularly on the "On/Horn" button or another pushbutton type.
FR EN
- 58 -
DE UR - 323245J