Receiver Antenna Assembly Before Commissioning - Jay Electronique UR Série Notice Technique D'installation Et D'utilisation

5.4- Installation of receiver antenna before comissioning
1- Open the receiver housing and unscrew the spiral nut used to secure the antenna.
2- Insert the antenna wire in the guide.
3- Slide the guide into the spiral nut, then fully into the cable gland base upto the limit in
the base.
4- Tighten the spiral nut to the sticking point, then add a quarter turn to lock the antenna
guide and ensure tightness of the assembly. Check that the guide is securely mounted.
Check that the antenna entered at most the guide to allow an optimal reception.
FR EN
- 64 -
STOP
DE
Spiral nut
Antenna wire
Receiver housing
Guide
UR - 323245J