Technical Data - IFM Electronic ecomat200 FD-2 Notice D'utilisation

FD-2
MONITOR

9. Technical data

Voltage supply
Voltage supply AC/DC
Frequency
Voltage supply DC
Voltage tolerance
Power consumption
Sensor inputs
Sensor types
Sensor supply
Load current sensor input
Current consumption sensor
Switch point for PNP pulse pick-up
Switch point for NPN pulse pick-up
Input frequency
Characteristic values
Accuracy of the frequency measurement
Power-on delay time
Reset/release inputs 1/2
External auxiliary voltage
Current consumption
Switch point for positive switching
Outputs
Relay outputs
Switching capacity
Relay switching times
Cycles
Transistor outputs
Switching voltage, current
Device data
Housing
Dimensions (H x W x D)
Weight
Protection housing / terminals
Connection
Display
page 32
DR2005
110...240 V AC/DC
50...60 Hz
27 V DC (typ. 24 V DC)
-20...+10 %
AC/DC input: 5 VA / DC input: 3 W
PNP/NPN; NAMUR (24 V DC)
24 V DC; short-circuit and overload protected
approx. 10 mA
max. 15 mA
> 12 V ON; < 5 V OFF
> 15 V OFF; < 8 V ON
max. 1 kHz (input pulses must be phase-shifted
and overlap for about 0.25 ms)
300 ms (this corresponds to the display refresh time)
typ. 2,5 mA
2 change-over contacts, potential-free
6 A (250 V AC); B300, R300
10...20 ms (energising), 30...40 ms (de-energising)
7
> 10
5
3 x 10 (250 V AC, 4 A, ohmic resistance)
2 x PNP switching
externally supplied, short-circuit protected
24 V DC (±20%), max. 15 mA
housing for DIN rail mounting; plastic
78 x 45 x 120 mm
21 dual-chamber terminals
2 x 2,5 mm² (AWG 14)
LC display, 7/14-segment
DR2006
23...60 AC/DC
50...60 Hz
< 1%
24 V DC
> 14 V
(without load)
490 g
IP 50/20