Multipair Party Mode; Secure Simple Pairing (Ssp) With Nfc; Aptx ® And Aptx Low Latency - Marmitek BoomBoom 93 Guide Utilisateur

4.4.1 Multipair Party mode

You can allow up to 2 devices to connect to the BoomBoom 93
simultaneously; Multipair Party mode.
First, ensure that multiple devices are paired with the
BoomBoom 93, following the steps in 4.3.1 and 4.3.2. Once
paired, up to 2 audio sources may connect to the BoomBoom 93.

4.4.2 Secure Simple Pairing (SSP) with NFC

The BoomBoom 93 is equipped with Near Field Communication
(NFC) If your smartphone also supports NFC, you can use this.
On your smartphone, tick the box allowing applications to use
NFC. Then, hold your smartphone near the N logo on the
BoomBoom 93. The smartphone will automatically link and
establish a Bluetooth connection. When you hold your phone near
the N logo again, the link will be disconnected. So, when using
NFC, you do not need to follow the individual steps Pairing and
Connecting.
4.4.3 aptX ® and aptX Low latency ®
The Marmitek BoomBoom 93 features aptX ® and aptX Low
Latency ® . If your Bluetooth audio source also supports this, an
aptX ® or an aptX Low Latency ® connection will be established
instead of an SBC connection. With an aptX ® connection, the
green LED will flash slowly; with an aptX Low Latency ®
connection, the green LED will be lit continuously. With an SBC
connection, the green LED will be off.
BoomBoom 93 11