Scheduled Maintenance Table - Nilfisk SR 1101 P Instructions D'utilisation

SCHEDULED MAINTENANCE TABLE

Procedure
Side and main broom height check and adjustment
Dust filter cleaning and integrity check
Engine oil level check
Engine air filter cleaning check
Skirt height and operation check
Filter shaker operation check
Hood safety switch operation check
Main broom driving belt visual inspection
Engine air filter cleaning
Nut and screw tightening check
Service and parking brake check and adjustment
Engine Oil Change
Fuel deposits container cleaning
Spark plug cleaning/adjustment check
Fuel tank and filter cleaning
Check of belt tension between engine and dynamotor
Steering chain check and cleaning
Main broom driving belt replacement
Engine air filter replacement
Spark plug replacement
Valve clearance check/adjustment
Main motor and drive system motor carbon brush
check or replacement
Replacement of the belt between engine and
dynamotor
Engine combustion chamber cleaning
Fuel supply hose check (and replacement)
Engine speed check
(*) For the relevant procedure, refer to the Service Manual.
(**) For the relevant procedure, see the Petrol Engine Manual.
(1) And after the first 8 running-in hours.
(2) The first time after 20 hours or after one month.
(3) Or every 3 months.
(4) Or every 6 months.
(5) Or every year.
(6) Every 500 hours.
(7) Every 2 years.
(8) Maintenance procedure to be performed by authorised Honda personnel, unless the operator has the service equipment and is
qualified to perform such procedure. Refer to Honda Service Manual.
(9) Clean more often in dusty areas.
(10) Replace only the paper element.
04/2009
INSTRUCTIONS FOR USE
Every 10
Upon delivery
hours
(**)
(**)
1464020000 - SR 1101 P
Every Every
Every 50
100 200
hours
hours hours
(*)
(*)
(*)
(**)(4)(9)
(*)(1)
(*)
(**)(2)(4)
(**)(4)
(**)(4)
(4)(8)
(*)
(*)
(*)
ENGLISH
Every Every
300 400
hours hours
(**)(5)(10)
(**)(5)
(5)(8)
(*)
(*)
(6)(8)
(7)(8)
(*)
17