Introduction; Manual Purpose And Contents; Target; How To Keep This Manual - Nilfisk SR 1101 P Instructions D'utilisation

ENGLISH

INTRODUCTION

NOTE
The numbers in brackets refer to the components shown in Machine Description chapter.

MANUAL PURPOSE AND CONTENTS

The purpose of this Manual is to provide the operator with all necessary information to use the machine properly, in a safe and
autonomous way. It contains information about technical data, safety, operation, storage, maintenance, spare parts and disposal.
Before performing any procedure on the machine, the operators and qualified technicians must read this Manual carefully. Contact
Nilfisk in case of doubts concerning the interpretation of the instructions and for any further information.

TARGET

This Manual is intended for operators and technicians qualified to perform the machine maintenance.
The operators must not perform procedures reserved for qualified technicians. Nilfisk will not be responsible for damages coming
from failure to follow these instructions.

HOW TO KEEP THIS MANUAL

The Instructions for Use Manual must be kept near the machine, inside an adequate case, away from liquids and other substances
that can cause damage to it.

DECLARATION OF CONFORMITY

The Declaration of Conformity, supplied with the machine, certifies its conformity with the law in force.
NOTE
Two copies of the original declaration of conformity are provided together with the machine documentation.

IDENTIFICATION DATA

The machine serial number and model name are marked on the plate (37).
Product code and year of production are marked on the same plate (Date code: A18, means January 2018).
The petrol engine model and serial number are marked on the plate (70).
This information is useful when requiring machine spare parts. Use the following table to write down the machine identification data.
MACHINE model ................................................................................
PRODUCT code ................................................................................
MACHINE serial number ...................................................................
ENGINE model ..................................................................................
ENGINE serial number ......................................................................

OTHER REFERENCE MANUALS

Other manuals supplied with the machine:
– Electronic Battery Charger Manual (if equipped), to be considered an integral part of this Manual
– Sweeper Spare Parts List
Other available manuals:
– Service Manual (that can be consulted at Nilfisk Service Centers)
2
INSTRUCTIONS FOR USE
SR 1101 P - 1464020000
revised 03/2018
04/2009