Menu Settings - Renkforce RCD-3038KL Notice D'emploi

Setting the time
Push the button DSP (12) briefly until the time is displayed.
Then hold the button DSP (12) pushed until the time display flashes.
Use the button 66 (5) to set the minutes and the button 44 (15) to set the hours.
RESET button
This button is behind the front cover next to the contacts for the operating unit and resets all the settings to
the original settings that were made in the factory.
Press this button in the following cases with a pointy object:
- when you have completed the installation and connection
- when the CD tuner does not react to the operation of buttons anymore
- when the display shows undefined characters
b) Menu Settings
VOLUME rotary control / SELECT button (4)
To select the menu settings, please press the SELECT button (4) a little longer (>2 seconds) and then press
this button once more, but only very briefly, until the desired function appears on the display.
Choose the options for the respective settings by turning the VOLUME control (4).
BEEP ON/OFF
BEEP ON: Every activation of a button is confirmed by a signal sound.
BEEP OFF: The sound confirmation function is deactivated.
47