Operation; General Operation - Renkforce RCD-3038KL Notice D'emploi

9. Operation

Do not turn on the device before you have read and understood these operating instructions.
Check all the connections again. When you have done so, reconnect the negative pole of the car
battery.
a) General Operation
MOD Button (1)
With this you can select various audio sources. Every time the button is pressed, the radio switches to the
next source:
AUX > TUNER > CD > USB > SD
When one of the sources is not active, i.e. no medium inserted, this source will be skipped in the
selection.
Button /MUT (2)
This button switches the radio on and off and activates muting.
Push briefly with the device switched off > device is switched on
Push briefly with the device switched on > muting is switched on or off
Hold pushed with the device switched on > device is switched off
You may also press any other button for switching on (except for the buttons (3) and (11)).
Button (3)
Press this button to unlatch the operating panel.
VOLUME rotary control / SELECT button (4)
In standard operation, the VOLUME control (4) is for setting the volume.
Press the SELECT button (4) once or several times to change the parameters BAS (bass control), TRB (tre-
ble control), BAL (balance control) and FAD (fader control) by turning the VOLUME control (4).
45