Renkforce RCD-3038KL Notice D'emploi page 40

• Remove the front control unit (step 1).
• Carefully remove the plastic frame in the front of the system, by bending it slightly to the outside and
pulling it off from the unit (step 2).
• Unlock the installation frame with the two unlocking keys (step 3).
• Remove the installation frame towards the back of the system (step 4).
• Insert the frame into the respective cut-out in the vehicle (step 5).
• Bend down some clips in the installation frame until the frame is securely fastened in the recess
(step 6).
• When you have made all the electrical contacts (see "Electric Connection") insert the CD tuner into the
frame until it locks in.
• Attach the plastic frame to the front of the device again.
Keep the two unlocking keys. You will need them for a later removal of the CD tuner.
40