Renkforce RCD-3038KL Notice D'emploi page 52

Syntoniseur cd
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

44 (15) and 66 (5) buttons
With these buttons the receiving frequency can be changed to adjust stations in radio operation.
Briefly pressing a button starts the automatic station search (display shows SEARCH).
The auto-scan only stops at the next station that can be received well.
By pressing a button longer, you activate manual station scan.
The display shows MANUAL.
In this mode, the frequency is changed until you release the corresponding button again. Brief presses of
this button changes the frequency step by step.
If buttons are not pressed for a longer period of time, the devices switches back to automatic
station search. The display shows AUTO.
Station buttons 1-6 (24)
If you briefly press these buttons, you can select a station you have pre-set.
If you want to store a station you are listening to, simply press the desired button for more than 1 second.
Every one of the three FM ranges (FM1-3) and the AM reception range (MW1 and MW2) has six
station buttons. Therefore you can assign 30 station buttons.
EQ/TA button (9)
Keep EQ/TA button (9) pushed
Keep the button pushed again
When you receive a traffic programme station, the display shows TP (traffic programme).
When you keep the TA button pushed, TA appears in the display as well.
If a different source is being played (e.g. SD playback), the programme is set to mute during the traffic
announcement.
When you listen to a radio programme at a very low volume, the volume is automatically increased to the
pre-set level (see menu settings TAVOL).
When the traffic announcement is over, the volume you were hearing before is restored.
AS/PS button (10)
If you push this button briefly, the stations stored on the station buttons 1-6 (24) are played for a few se-
conds each. To stop the auto-scan, push the button again.
When you keep the button pushed, all the stations that can be received well are stored on the station
storage buttons 1-6 (24).
After this procedure, the stored stations are played for a few seconds each as described above.
52
>
TA is activated
>
TA is deactivated

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

373472

Table des Matières