Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
28
Technical Data
Circular table saw
Art. No
Service connection
Rated input
Idle speed
Saw blade dia. x hole dia
Cutting depth max. 90°
Cutting depth max. 45°
Riving knife
Weight
Dimensions LxWxH (in mm)
Noise details
Sound pressure level L
Sound power level L
Measured according to EN 61029;
Uncertainty K = 3 dB (A)
Wear ear protectors!
The values stated are emission values and as such do not necessarily constitute values which are safe for the
workplace. Al- though there is a correlation between emission levels and environmental impact levels, whether
further precautions are neces- sary cannot be derived from this. Factors influencing the actually present envi-
ronmental impact level in the workplace include the characteristics of the work area and other noise sources, i.e.
the number of machines and other neighbouring work process- es. The permitted workplace values can likewise
vary from country to country. This information is intended to assist the user in estimating hazards and risks.
Read and understand the operating instructions
before using the appliance. Abide by all the safety
measures stated in the service manual. Act responsib-
ly toward third parties.
In case of any doubts about connection and operati-
on refer please to our customer center
Specified Conditions Of Use
The circular saw is only intended to cut wood and
wood like products. Respecting technical data and
safety precautions.
Do not use this product in any other way as stated for
normal use.
Not observing general regulations in force and
instructions from this manual does not make the
manufacturer liable for damages.
Requirements for operating staff
The operating staff must carefully read the Opera-
ting Instructions before using the appliance.
pA
WA
GTK 2500 P
55140
230 V~50 Hz
S1 1800W, S6 40% 2000 W
4250 min
-1
min 250/max 254 x 2,8 x 30
mm, HM 30 Z
80 mm
55 mm
2 mm
21,6 kg
636 x 426 x 870 mm
91 dB (A)
104 dB (A)
Because wrong using of the appliance can be risky,
only competent persons are allowed to operated it.
Operator must be trained properly concerning adjust-
ment, operation and appliance using.
Qualification: Apart from the detailed instructions
by a professional, no special qualification is necessary
for appliance using.
Minimum age: Persons over 16 years of age can
only work on the appliance. An exception includes
youngsters trained in order to reach knowledge
under supervision of the trainer during occupational
education.
Training: Using the appliance only requires corre-
sponding training by a professional or the Operating
Instructions. No special training is necessary.
The operator is responsible for accidents or risks to
third parties.
GTK 2500 PS
55207
230 V~50 Hz
S1 1800W, S6 40% 2000 W
4250 min
-1
min 250/max 254 x 2,8 x 30
mm, HM 30 Z
80 mm
55 mm
2 mm
19,8 kg
636 x 426 x 870 mm
91 dB (A)
104 dB (A)
Publicité
