Telephone Helpline: 0845 146 2887 (United Kingdom)
Turn On
Close the door(s) of the appliance.
1.
Ensure the power switch is set to [O] and turn on at the socket.
2.
Switch on the Power [I]. The current temperature within the appliance is displayed.
3.
Control Panel
DEFROST LED
(Illuminates when defrost is activated)
DOWN button
Lock/Unlock the Control Panel
To lock the control panel:
Press and hold the UP
and DOWN
1.
Pof flashes on the display and the keyboard is locked.
2.
To unlock the control panel:
Press and hold the UP
and DOWN
1.
Pon flashes on the display and the keyboard is unlocked.
2.
Note:
If a button is not pressed for 10 seconds while using the control panel it times out and reverts to standby mode.
When parameters are being set the Setpoint LED will flash on the display.
Enter the Parameter Menu
Unlock the control panel, if locked.
1.
Press and hold the SET
2.
If necessary, press the SET
3.
Alter Parameter Value
Note: Your POLAR appliance has been preset with default parameters generally deemed suitable for normal operation. POLAR
recommend these preset values are used.
To alter the value, (if necessary):
With the desired parameter displayed, alter the value using the UP
1.
Press the SET
button to store the value.
2.
Note: The control panel will automatically move to the next parameter. To return to standby mode allow the control panel to time
out.
UP button
buttons simultaneously for 10 seconds.
buttons simultaneously for 10 seconds.
button until 'd1' flashes on the display.
button repeatedly to scroll to the desired parameter (see "Parameter Descriptions" for parameter details).
Pon
Display Panel
and DOWN
buttons.
SETPOINT LED
(Illuminates when parameters are being set)
DEFROST button
SET button
UK
2