Setting The Volume; Paging; Flash Button (R); Setting The Ring Volume And Melody - Topcom Butler 3450 Manuel De L'utilisateur

5.7

Setting the volume

During a conversation you can set the volume by pressing the Volume button
set the volume alternatively in Hi, Medium and Low.
The hands free receiver volume is also adjustable as above described!
5.8

Paging

When you press the Paging button
20 seconds. This signal helps you find a lost handset. Press any key to stop the ringing on a
handset.
5.9

Flash button (R)

When you press the R button, also called flash or recall, the unit generates a line interruption
(of 100 ms or 250 ms). It gives you the possibility to use the special services of your
telephone provider and/or to transfer calls when you have a telephone exchange.
5.9.1 Setting the Flash time
• Press and hold the redial button
• The display will show:
'S' for 100ms
or 'L' for 250ms
• The flash time setting will disappear after 2 sec. from the display

5.10 Setting the ring volume and melody

5.10.1 Handset melody
• Press and hold the melody button
• Select the desired melody (1-9) by means of the scroll keys
number (1 - 9).
• Press again to confirm the setting
5.10.2 Handset ring volume
• Press the volume button
• The handset will ring in the current volume
• Press 1-5 or use the scroll keys
• Press '0' to turn the volume OFF
Topcom Butler 3450/Twin/Triple/Quattro
All manuals and user guides at all-guides.com
on the base unit, the handset emits a ringing signal for
for 3 sec.
until the current melody is heard.
in standby
to select the desired volume
Topcom Butler 3450/Twin/Triple/Quattro
or by entering a
. You can
11