Star TSP552 Mode D'emploi page 99

A-1. General Specifications
(1) Printing method
(2) Print speed
(3) Dot density
(4) Number of print columns
(5) Roll paper
(6) Cutter
(7) Sensor
(8) Overall dimension
(9) Weight
A-2. Print Specifications
(1) Print width
(2) Character size
(3) Column pitch
(4) Character set
(5) Character enlargement/reduction
A-3. Interface
(1) Interface
(2) Command
Appendix A: Specifications
Direct line thermal printing
105 mm/s
Note: Print duty is 16.5% or less.
8 dots/mm (0.125 mm/dot)
48
Refer to chapter 3 for details on the recommended
paper.
Paper width: 80
Roll diameter: ø83 mm or less
External diameter of core: ø18
Internal diameter of core: ø12 ± 0.5 mm
Partial cut (leaving the center of the paper intact)
Paper end, cover open, paper near end
142 (W) × 215 (D) × 149 (W) (mm)
Approx. 2.2 kg
72 mm
1.25W × 2.75H (mm)
1.5 mm
Numeric, alphabet, kana, special, ruled line symbols,
extended graphic, international, user characters
double width, double height, double size
RS232C serial interface
TM
ESC/POS
– 95 –
0
mm
- 1.0
+0.5
commands or Star commands
mm
0