Individual Settings; Deletion Of Total Kilometres; Storage Of Defaults - Kettler SM3600 Mode D'emploi Et Instructions D'entraînement

Training and Operating Instructions
> =
> =
> =
> =
30
GB
=>
=>
=>
=>
=>

Individual settings

Proceed according to the figure on the left:
Press "RESET"
Display: all segments
Now press "SET" for a longer period of time: menu: indivi-
dual settings
Display: Scale
1. Display of the unit in kilometres / miles
Press "Plus" or "Minus"
Function: Selection kilometres or miles display
Press "Set": the selected unit is accepted and change to
the next setting
Display:
Reset +/– Total kilometers

2. Deletion of total kilometres

Press "Plus" + "Minus" together
Display:
Function: Deleting "Reset O.K."
Press "Set": change to the next setting
Or: Skipping Deletion of the total values, only press "SET"
Display:
Energ.
3. Display of the energy consumption in kJoule /
kcalorie
Press "Plus" or "Minus"
Function: Selection of the energy consumption display
Press "Set": the selected unit is accepted and change to
the next setting
Display: Store

4. Storage of defaults

Press "Plus" or "Minus"
Defaults for distance, time, energy, age, target pulse are
permanently stored
Function:
ON = Storage also after "Reset"
Off = Storage until next "Reset"
Press "Set":
Change to the next setting
Display:
Alarm
5. Alarm sound in case of exceeding the maximum
Press "Plus" or "Minus"
Function: Switching on or off the alarm sound.
Press "Set": the selected setting is accepted and "restart" of
the display.