Serial (Tty) Interface Overview - Eaton Powerware 9125 Guide D'installation

COMMUNICATION OPTIONS

Serial (TTY) Interface Overview

To serially (TTY) connect the UPS to a p5, pSeries, RS/6000
OpenPower or other system you need:
S
S
For p5 installations, you also need:
S
S
Follow the software installation instructions contained on the Software
Suite CD to install the Powerware LanSafe software. Connect the serial
cable as shown in Figure 39.
44
EATON Powerware
An Eaton-supplied serial interface cable (labeled 116750226-001 or
124102044-001), located in the P64 accessory kit
®
Powerware LanSafe Power Management Software from the
Software Suite CD, located in the P64 accessory kit
An IBM-supplied 2-port Asynchronous EIA adapter (FC 5723) installed
on a p5 server (the pSeries does not require an EIA adapter)
An IBM-supplied maintenance package 5200-05 for AIX
(APAR IY66260); or the maintenance package 5300-01 for AIX 5.3L
V5.3 (APAR IY62267)
IBM p5 Server
Serial Interface Cable
(labeled 116750226-001
or 124102044-001)
Communication Port
UPS
Figure 39. Serial (TTY) Interface
®
9125 (9910-P64) UPS Installation Guide for IBM
, ®
®
5.2L V5.2
2-Port Asynchronous
EIA Adapter
(FC 5723)
® S
Applications 164201637 Rev A