Güde 40065 Traduction Du Mode D'emploi D'origine page 7

GB
Please read carefully the following Operating Instructions before putting the appliance into operation
A.V. 2 Any reprints, even partial, are subject to approval. Technical changes reserved.
Signs on Unit
Meaning of Symbols
Symbols shown below are used throughout this manual and/or on the unit:
Product compliance with
respective EU standards
Operating pressure
Wastes to be disposed of
in a professional manner
Weight
not to harm the environ-
Fragile
Using the appliance as designated
The pneumatic cutter is an appliance for craft purposes that is ideal for:
sheet metal cutting or shearing, rivet head removing or perforating. Any other use is considered a use in conflict with the appliance
designation.
Appliance description
1. Return spring
2. Button
3. Adjusting screw
4. Air connection
5. Cylinder
6. 5 cutters
7. Oil bottle
8. Clutch
9. Mini oil can
General safety instructions
These Operating Instructions need to be read thoroughly before using the appliance for the first time. If any doubts regarding the
appliance connection and operation arise, please contact the manufacturer (service department).
TO ENSURE A HIGH SAFETY LEVEL, PLEASE FOLLOW CAREFULLY THESE INSTRUCTIONS:
• After removing the package, check whether the appliance and all other parts are in a perfect condition.
•
Risk of explosion! Do not work in an explosive environment. Do not exceed the specified operating pressure (see Technical
specifications). Compressed air should be used as the only source of energy. Pay attention to electric lines, gas conduits,
fuel lines and tanks.
•
Risk of knife being thrown off! Make always sure the knives are fitted appropriately. No idle cycle. Touching the knife is
prohibited when the appliance is running!
• Keep the place of your work clean and tidy! Mess in the place of your work and work-table increases the risk of accident
and injury.
Illustrative pictures! Translation of original operating instructions.
Read instruction manual
Warning/Caution
Number of strokes Connecting thread
Keep away from moisture
ment.
Wear goggles and ear pro-
before use tectors
Air consumption
Cardboard packaging to be
collected for recycling.
7
Use protection gloves
Knife length
The package should be
held upwards