Tylo SENSE SPORT Notice D'utilisation page 11

Figure 6: Circuit board
1. Electrical cable
2. Terminal for connection of electrical cable
4. Close the cover and tighten the screws (see Figure 5, Page
6).
CAUTION! If all the screws on the back are uns-
crewed simultaneously, the back plate may come
loose. For this reason, attach the four brackets to
the heater one at a time.
5. Unscrew the fi rst two screws on the back of the heater and
screw one of the four brackets into place. Repeat the proce-
dure until all of the brackets are fi tted see Figure 7, Page 7.
Figure 7: Attaching the brackets to the heater
6. Position the bracket screws according to the specifi ed dimen-
sioning see Figure 8, Page 7.
1
2
4
3
2
Figure 8: Dimensioning
1. 262 mm
2. 270 mm
3. 532 mm
4. 206 mm
7. Attach the herb bowl/air humidifi er (see Figure 9, Page 7).
Figure 9: Fitting the fragrance holder/air humidifi er
8. Hang the heater on the screws se Figure 10, Page 7.
Figure 10: Hang the heater up.
9. Lock the heater into place with the lock screw see Figure 11,
Page 7.
Figure 11: Lock screw for bracket
9
1