AFG 18.1AXT Manuel Du Propriétaire page 14

ASSEMBLY STEp 5
CONSOLE
CONSOLE CABLES
PRE-ATTACHED
BOLTS
WATER BOTTLE
HOLDER
PRE-ATTACHED
BOLTS
NOTE: Be careful not to pinch any wires while attaching the
console mast or console.
14
BOLTS (C)
WASHER (L)
CONSOLE MAST
Open hardware for step 5.
A
Run Console Cables from main frame
B
braCket through the Console mast.
CONSOLE CABLES
Attach Console mast to the main
C
frame braCket using 4 bolts (C) and 4
MAIN FRAME
BRACKET washers (l).
Attach the Console Cables to the
D
Console.
Carefully tuck the Console Cables into
E
the Console mast before attaching the
Console. Attach Console to Console
mast using 4 pre-attaChed bolts.
Attach water bottle holder to
F
Console mast using 2 pre-attaChed
bolts.
HARdWARE fOR STEp 5:
BOLT (C) WASHER (L)
16 mm 18 mm
Qty: 4 Qty: 4