AFG 18.1AXT Manuel Du Propriétaire page 11

ASSEMBLY STEp 2
TOP HANDRAIL
ARC WASHERS (E)
BOLTS (C)
REAR UPRIGHT
BASE RAIL
NOTE: Assemble the top handrails so they are parallel to the floor. Do not assemble with the top handrail resting on the floor.
Assemble the rear uprights so they curve toward the main frame as illustrated.
A
B
C
MAIN FRAME
AXLE
WASHERS (D)
BOLTS (C)
BASE RAIL BRACKET CAPS
HARdWARE fOR STEp 2:
BOLT (C)
16 mm
Qty: 12
AXLE
Qty: 2
SIDE
VIEW
Open hardware for step 2.
Attach the rear uprights to the base
frame using 4 bolts (C), 4 washers (d),
4 base rail braCket Caps and 2 axles.
Partially thread the top handrails to the
rear uprights using 8 bolts (C) and 8
arC washers (e).
WASHER (D)
25 mm
Qty: 4
ARC WASHER (E)
17 mm
Qty: 8
11