Hülsta PREMIUM Mode D'emploi page 21

EC-declaration of conformity
Company:
Description:
Products/types:
Version/function:
Relevant EC-regulations/
Machinery guideline:
Possible other relevant EC-regulations:
Applied standards:
Design changes that affect the technical data specified in the assembly instructions and the
intended use, i.e. that significantly change the product, render this declaration of conformity
invalid!
We herewith confirm that the above-mentioned products comply with the aforementioned EC
regulations.
Stadtlohn, 01.08.2020
40
hülsta-werke Hüls GmbH & Co.KG
Karl-Hüls-Straße 1
D-48703 Stadtlohn
Motor-driven base frame / cable control
hülstaflex premium
Motor-driven base frame for comfortable lying/ relaxing/
sitting for domestic use. Back and foot section
motor-adjustable.
Machinery guideline 2006/42/EG
Low voltage guideline 2006/95/EG
Electro-magnetic compatibility regulation
2004/108/EG
EN 60335-1: 2012; EN 55014-1/A1: 2009; EN 55014-2/
A2: 2008; EN 61000-3-2/A2: 2009; EN 61000-3-3: 2008;
EN 62233: 2008 DIN ISO 12100-1; DIN EN 1725,
DIN ISO 13857; DIN EN 1807: 1999 + A1: 2009;
DIN EN 60204 -1: 2007
Dr. Thomas Knecht
Management
EC-declaration of conformity
Company: hülsta-werke Hüls GmbH & Co.KG
Karl-Hüls-Straße 1
D-48703 Stadtlohn
Description: Motor-driven base frame / remote control
Products/types: hülstaflex premium
Version/function: Motor-driven base frame for comfortable lying/
relaxing/sitting for domestic use. Back and foot
section motor-adjustable.
Relevant EC-regulations/
Machinery guideline: Machinery guideline 2006/42/EG
Low voltage guideline 2006/95/EG
Possible other relevant EC-regulations: Electro-magnetic compatibility regulation
2004/108/EG
R&TTL guidelines
RoHS-guideline 2011/65/EU of the European Parliament and Council dated 8th June 2011
regarding limiting the use of certain dangerous substance in electric and electronic devices.
Applied standards: EN 60335-1: 2012; EN 55014-1/A1: 2009; EN 55014-2/
A2: 2008; EN 61000-3-2/A2: 2009; EN 61000-3-3: 2008;
EN 62233: 2008 DIN ISO 12100-1; DIN EN 1725,
DIN ISO 13857; DIN EN 1807: 1999 + A1: 2009;
DIN EN 60204 -1: 2007
Design changes that affect the technical data specified in the assembly instructions and the
intended use, i.e. that significantly change the product, render this declaration of conformity
invalid!
We herewith confirm that the above-mentioned products comply with the aforementioned EC
regulations.
Stadtlohn, 01.08.2020
Dr. Thomas Knecht
Management
41