Technical Specifications; Symbols And Icons; Symbols On The Device - Grizzly BRM 42-125 BS Traduction De La Notice D'utilisation Originale

Technical Specifications

Petrol lawnmower
without rear-wheel
drive............................ BRM 42-125 BS
rear-wheel drive.......BRM 42-125 BSA
Engine .............4-stroke B&S 300 E Series
B&S Engine design number .............80000
Engine size ............................. 125 cm
Power input ...................................1.82 kW
Blade rotation speed (n
Blade torque .................................... 45 Nm
Petrol tank volume............................... 0.8 l
Octane rating .....................................95-98
Engine oil tank volume ........................ 0.5 l
Spark plug ..................Champion QC12YC
Cutting circle ...............................ø 420 mm
Cutting height . 5-stage, 25-37-50-62-75 mm
Grass collection box volume ................ 45 l
Weight (inc. collection box,
with an empty tank) ........................... 25 kg
Sound pressure level
(L ) ........................81.9 dB(A); K=3.0 dB
pA
Sound power level (L
measured ..............93.4 dB(A); K=3.0 dB
guaranteed ................................96 dB(A)
Vibration at the handle
(a ) .......................... 8.0 m/s
h
Noise and vibration values have been de-
termined according to the standards and
regulations mentioned in the declaration of
conformity.
Technical and optical changes can be car-
ried out in the course of further develop-
ment without notice. All dimensions, refer-
ences and information of this instruction
manual are therefore without guarantee.
Legal claims, which are made on the basis
of the instruction manual, cannot thus be
considered as valid.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
(cc)
3
) .. max. 2900 min
0
)
WA
; K=1.5 m/s
2
compare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Safety precautions aimed at pro-
-1
tecting the user should be based
on estimated exposure under actu-
al usage conditions (all parts of the
operating cycle are to be consid-
ered, including, for example, times
during which the power tool is
turned off and times when the tool
is turned on but is running idle).

Symbols and icons

Symbols on the device

Attention!
Read the instruction manual.
2
Risk of injury from parts being
flung out.
Keep bystanders away from the
equipment.
Risk of injury from sharp blades.
Keep feet and hands away.
Caution – toxic fumes!
Do not operate the equipment in
enclosed areas.
Caution – petrol is flammable!
Do not smoke and keep away
from heat sources.
GB
87