Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
1. Unscrew the oil filler cap and
dipstick (19) and pour oil into the
tank. The oil tank holds 0.5 l oil.
Use brand oil (e.g. SAE 30).
2. To check the oil level, wipe the
dipstick (19) on a clean cloth
and replace it in the tank until it
stops.
3. After pulling it out, read off
the oil level on the dip-
stick. The oil level should
be in the marked area be-
tween the minimum and
maximum marks.
4. Wipe off any spilt oil and
close the oil filler cap (19).
Check the oil level every time be-
fore mowing and add oil before the
lower marking point is reached.
Filling with Petrol
Warning! Petrol is flammable and haz-
ardous to health:
- Keep petrol in containers intended for
this purpose;
- Only refuel outdoors and never with
the engine running or when the ma-
chine is hot;
-
Open the filler cap carefully to allow
excess pressure to escape;
-
Do not smoke whilst refuelling;
-
Avoid skin contact and inhalation of
the fumes;
-
Remove spilt petrol;
-
Keep petrol away from sparks, open
flames and other ignition sources;
-
Dispose of leftover petrol in an envi-
ronmentally friendly way (see "Dis-
posal / Environmental Protection").
- Do not use petrol/oil mixtures;
- Use normal or super unleaded
petrol;
- Only use clean, fresh petrol;
- Do not store petrol for longer
than one month, as its quality
deteriorates.
1. Unscrew the filler cap (
and pour in the petrol to the filler
plugs (31). Do not fill the tank
entirely, to allow the petrol room
to expand.
2. Wipe away petrol residues
around the filler cap and close
the filler cap.
Operation
A certain level of noise exposure
caused by this device is unavoid-
able. Rearrange noise-intensive
works to times approved and speci-
fied for this purpose. Comply with
the rest periods and reduce the work
period down to the minimum. For
your personal protection and the
protection of people near by, suita-
ble hearing protection must be worn.
Starting and Stopping the En-
gine
Warning! Petrol is flammable.
Start the engine at least 3 m away
from the filling location. There is
a risk of fire.
Start the equipment on a sturdy,
level base, if possible not in long
grass. Ensure that the cutting tool
is touching neither objects nor the
ground.
GB
8)
93
Publicité
Chapitres
Table des Matières
