Safety Instructions; Operational Start Up; Preparing The Coffee Machine - Rotel Adagio 277 Mode D'emploi

1. Safety instructions

• This equipment may only be used for its intended purpose and is not designed for
commercial use.
• Only use alternating current with the power output indicated on the type plate.
• Use the equipment only if it and the power cord are undamaged.
• Place the equipment on a level, solid surface, and only use it indoors.
• Never place the equipment on hot surfaces or near open flames.
• This appliance is not intended for use by persons (including children) with reduced
physical sensory or mental capabilities lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by
a person responsible for their safety.
• Unplug the equipment when not in use for longer periods.
• Never wash the equipment or individual parts in a dishwasher.
• Unplug the equipment immediately if defective (never pull on the power cord or the
equipment itself).
• Defective equipment may only be repaired by our customer service.
• We will assume no liability for possible damages resulting from incorrect operation,
improper use or unprofessional repairs. All guarantee benefits are void in such cases.
Please note: Switching off the power switch (13) while brewing can damage the equip-
ment! You may only off the equipment when the on/off button (3) is on OFF (stand-by).
CAUTION: VERY HOT LIQUIDS CAN CAUSE SEVERE BURNS!
• When drawing steam or hot water, the jet (8) could spray. CAUTION: DANGER OF
SEVERE BURNS!
• The steam jet (8) may only be grasped on the black plastic part and never pointed
at people!

2. Operational start up

2.1 Preparing the coffee machine

• Carefully remove the equipment and all the accessory parts from the packing box.
Please not: If service is necessary you may return the equipment by mail in its
original packing box without reservation. Please safe the original packing box
and the packing material in a convenient place.
• Remove the water tank (16) and rinse it with cold clear tap water.
• Fill the tank to the maximum mark and place it into the coffee machine. Please
make sure that it clicks into place well when inserting.
Use only clear cold water when filling the tank, and never use carbonated
water or other liquids.
• Open the cover to the bean holder (11) and fill it with coffee beans.
22