Güde GDT 901 Traduction Du Mode D'emploi D'origine page 21

Gs 4001 | Gs 8501 | Gs 7501 i | Gsx 1101 | GDT 901
Inspection and maintenance plan
Time interval Description
As needed cleaning and rinsing out
Failures – causes - removal
Failures Causes
engine does not start no system voltage
blocked pump wheel
floating switch in shutdown position
Pump does not suck Pump without water
water level too low
blocked pump wheel
Thermal detector swit- Dirty tube filter
ching the pump off
water temperature too high
5
Pump running continuously at maximum
pressure.
insufficient amount of Dirty tube filter
water pumped water level quickly going down
Maximum head of delivery exceeded
Transport guide broken
Any other details
function check of the floating switch
Removal
check the voltage
Visually inspect the pump wheel for foreign
objects
check the water level
Let the air bubbles release
switch the pump off, water level must go up.
remove the obstruction
clean the tube filter and let the pump cool
down
reduce the water temperature
Make more breaks
clean the tube filter
ensure sufficient inflow
check the transport path length
check the transport guide
ENGLISH
17
4
3