Indicator Light And Function Settings - Silk-n Pure H4101 Instructions D'utilisation

■
Pure™ features an overcharge protection system so the device can always
be kept charged. Silk'n recommends to unplug and conveniently store the
charging adaptor after each full charge until charging is required.
■
You can leave Pure™ in the face brush stand as a counter top stand when
not charging.
IMPORTANT: Make sure the device is completely dry before
charging. For best results charge your Pure™ for 6 hours prior to
first use.

4.2 Indicator light and function settings

1. Press On/Off button once: Vibrating function, low-speed; red LED light off
2. Press On/Off button twice: Vibrating function, high-speed; red LED light off
3. Press On/Off button three times: Pulsating function, low-speed; red LED
light off
4. Press On/Off button four times: Pulsating function, high-speed; red LED light
off
5. Press On/Off button five times: Device turns off
6. Blinking red LED light for 10 seconds: Low battery
7. Blinking red LED light continuously: Charging
8. Constant red LED light: Full charge
PLEASE NOTE: After 1 minute the device switches off
automatically.
26