Name Plate - Breezy UniX2 Notice D'utilisation

Options - Lap Belt>>>
When fastened check space between the lap belt and user, when
correctly adjusted it should not be possible to insert more than the
flat of the hand between the lap belt and the user. (Fig. 26)
Generally the Lap Belt should be fixed so that the straps sit at an
angle of approximately 45°, and when correctly adjusted should not
allow user to slip down in the seat.
(Fig. 27)
Fig. 26
To fasten buckle:
Firmly push male buckle into
female buckle.
ADVICE TO CLIENT
DANGER!
• Do not rely on the lap belt only when the wheelchair and
occupant are transported in a vehicle, use the separate
occupant lap and diagonal restraints provided in the vehicle.
• Before use we recommend that the lap belt be checked to
ensure that it is adjusted correctly, free from any obstruction or
adverse wear and that the buckle engages securely.
• Failure to make sure that the lap belt is secure and adjusted
prior to use could cause serious injury to the user. e.g. too
loose a strap may allow the user to slip down in the chair and
risk suffocation.
MAINTENANCE:
Check lap belt and securing components at regular intervals for
any sign of fraying or damage. Replace if necessary. Clean the lap
belt with warm soapy water and allow it to dry.
DANGER!
The lap belt should be adjusted to suit the end user as detailed
above Sunrise Medical also recommend that the length and fit of
the belt is checked on a regular basis to reduce the risk of the end
user inadvertently re-adjusting the belt to an excessive length.
If in doubt about the use and operation of the seat belt then ask
your health care professional, wheelchair dealer, carer or attendant
for assistance.
Fig. 27
To release belt:
Press exposed sides of male
buckle and push towards
centre / push the press button
of the female buckle whilst
gently pull ing apart.

Name Plate

NAMEPLATES
The nameplate is located on either the cross-tube assembly or the
transverse frame tube, as well as on a label in the owner's manual.
The nameplate indicates the exact model designation and other
technical specifications. Please provide the following pieces of
information whenever you have to order replacement parts or to file
a claim:
SAMPLE
UniX
2
Product Name/SKU Number.
Maximum safe slope with anti-tips fitted,
Depends on wheelchair setting, posture and
physical capabilities of the user.
Seat width.
Depth (maximum).
Load Maximum.
CE Mark
User's Guide.
Crash Tested
Date of manufacture.
Serial number.
Due to our policy of continuous improvement in the design of our
wheelchairs, product specifications may vary slightly from the
examples illustrated. All weight/dimensions and performance data
are approximate and provided solely for guidance.
Sunrise Medical complies with the EU Medical Devices Directive
93/42/EEC
All wheelchairs must be used in accordance with the
manufacturer's guidelines.
Sunrise Medical GmbH & Co.KG
Kahlbachring 2-4
69254 Malsch/Heidelberg
Germany
Tel.: +49 (0) 7253/980-0
Fax: +49 (0) 7253/980-111
www.sunrisemedical.com
13
UniX
2