Analog way OCTO-PLUS Manuel Utilisateur page 22

Chapter 6 : LCD FUNCTIONS DESCRIPTION (continued)
4 [IMAGE] + ENTER.
WARNING: In Seamless mode this menu is not available for the "reference" Computer source.
NOTE: The image menu contents will be different in case of computer or video on the input selected.
[centering] + ENTER.
4-1
Adjust automatically the image in the centering pattern.
[pos. settings] + ENTER.
4-2
Select one of the following function with
4-2-1 [H position] + ENTER.
Adjust the Horizontal position with
4-2-2 [V position] + ENTER.
Adjust the Vertical position with
4-2-3 [H size] + ENTER.
Adjust the Horizontal size with
4-2-4 [V size] + ENTER.
Adjust the Vertical size with
[aspect ratio] + ENTER.
4-3
Select the Aspect Ratio of your input source with
• [4/3 standard] =
• [WS anamorphic] = Widescreen Anamorphic input format (video) or 16/9 input format (computer).
[H. smooth] + ENTER.
4-4
Adjust the horizontal smooth with
• If the selected input is a VIDEO signal (LCD menu # 1-2 =SDTV---) the IMAGE MENU displays the following items:
[brightness] + ENTER.
4-5
Adjust the Brightness with
[contrast] + ENTER.
4-6
Adjust the Contrast with
[color] + ENTER.
4-7
Adjust the Color with
[hue] + ENTER.
4-8
Adjust the Tint of the picture (NTSC only) with
[u / over scan] + ENTER.
4-9
Select Underscan or Overscan with
• [underscan] = Underscan mode. The entire image is visible on the screen. Computer mode is underscan.
• [overscan] =
4-10 [sharpness] + ENTER.
This function allows increasing the sharpness of the image. Select a level with
4-11 [preset] + ENTER.
This function allows setting all the image parameters to the factory settings. Select [YES] and validate with ENTER.
• If the selected input is a COMPUTER signal (LCD menu # 1-2 = Computer---) the IMAGE MENU displays:
[black level] + ENTER.
4-5
Adjust the black level with
[color] + ENTER.
4-6
Select a color (Red, Green, or Bleu) with
[optimize] + ENTER.
4-7
Select an item with
• [clock] = Manual adjustment of the pixel clock.
• [phase] = Manual adjustment of the pixel phase.
[preset] + ENTER.
4-8
This function allows setting all the image parameters to the factory settings. Select [YES] and validate with ENTER.
PAGE 22
+ ENTER.
+ ENTER.
4/3 input format.
+ ENTER.
+ ENTER.
+ ENTER.
+ ENTER.
+ ENTER.
Overscan mode. The image is displayed about 8 % bigger than in underscan mode, to avoid
seeing the corners and the borders. Standard TV display mode is overscan.
+ ENTER.
+ ENTER.
+ ENTER.
+ ENTER.
+ ENTER.
+ ENTER.
• [16/9 letterbox] = Letterbox input format.
+ ENTER.
+ ENTER and adjust the level with
OCTO range
+ ENTER.
+ ENTER.