Analog way OCTO-PLUS Manuel Utilisateur page 23

OCTO range
[AUDIO] + ENTER.
5
[master volume] + ENTER.
5-1
Adjust the audio output level with
[audio source] + ENTER.
5-2
Select an item with
• [auto follow] = The audio follows the video image.
• [input --] =
[audio level] + ENTER.
5-3
This function allows to separately adjust the level of each audio input. Adjust the level with
NOTE: This function acts on the selected (diffused) audio input.
[audio balance] + ENTER.
5-4
This function allows adjusting for each input the audio balance. Adjust the level with
NOTE: This function acts on the selected (diffused) audio input.
[mic. control] + ENTER.
5-5
Select an item with
5-5-1 [tone] + ENTER.
Adjust the microphone tone with
5-5-2 [compression] + ENTER.
Select an item with
• [no] = linear output versus input.
• [2/1] = the output is compressed in order to reduce the dynamic.
5-5-3 [noise gate] + ENTER.
Adjust the noise gate threshold with
NOTE: This function eliminates very low noises.
5-5-4 [voice over] + ENTER. This menu is available with the voice over option only (OPT-VOV802).
This option allows to automatically tone down the audio background when the microphone is used. Select an
adjustment with
5-5-4-1 [threshold] + ENTER.
5-5-4-2 [depth] + ENTER.
5-5-4-3 [release time] + ENTER.
[mute off] + ENTER.
5-6
Switch ON or OFF the audio output. Validate with ENTER.
+ ENTER:
The selected audio input (is permanently diffused).
+ ENTER:
+ ENTER.
+ ENTER.
Adjust the threshold level of the toning down with
Adjust the toning down level with
Adjust the release time of the audio background with
• [fast] = 0.5 second.
• [slow] = 2 seconds.
Chapter 6 : LCD FUNCTIONS DESCRIPTION (continued)
+ ENTER.
+ ENTER.
+ ENTER.
+ ENTER.
+ ENTER.
+ ENTER.
+ ENTER.
+ ENTER.
PAGE 23