Analog way OCTO-PLUS Manuel Utilisateur page 7

OCTO range
1-6. FRONT PANELS DESCRIPTION
• FRONT PANEL OF THE OCTO-PLUS
• FRONT PANEL OF THE OCTO-LOGO
• FRONT PANEL OF THE OCTO-FADE
• FRONT PANEL OF THE OCTO-FX
MIC LEVEL:
INPUT 8:
C.VIDEO:
S.VIDEO:
L+R:
COMPUTER/YUV:
INPUT SELECTION:
FREEZE:
(OCP802 & OLG802)
EFFECT:
(OFD802 & OFX802)
LCD CONTROL
EXIT MENU:
ENTER:
ON / OFF:
™
™
™
™
Microphone audio level adjustment.
Universal (computer and video) input # 8.
Composite Video input (RCA female connector).
S.VIDEO (Y/C) input (4-pin mini DIN female connector).
Audio stereo unbalanced input (jack 3.5 mm female connector).
Computer (PC, MAC, WORKSTATION), YUV (component) and HDTV input (HD15
female connector).
• Selection of the 8 input sources (short push).
• A long push (1 second) on the selected input button allows to active the BLACK
function. A black screen is displayed onto the output (the blinking LED indicates that this
function is active). A short push on an INPUT SELECTION button allows to inactive this
function.
Allows to freeze the displayed output (the blinking LED indicates the FREEZE is active).
Allows to select a type of effect between: CUT, FADE and TITLE.
• LED OFF = CUT effect selected (SEAMLESS transition).
• LED blinking = FADE effect selected.
• LED ON = TITLE effect selected.
NOTE: These effects are active between the reference computer input and the other
inputs. In other cases the transition operates with a FADE COLOR.
Allows to scroll thru the different menus (in Control mode) or to adjust the master volume
(in Status mode).
Switches between Status and Control mode.
Validates a selected item.
AC power switch (O = OFF, I = ON).
Chapter 1 : INTRODUCTION (continued)
PAGE 7