Analog way OCTO-PLUS Manuel Utilisateur page 37

OCTO range
9-4. COMMANDS AND RESPONSES TABLE (continued)
ASCII RESPONSE
COMMAND
EFFECT COMMANDS (OCTO-FADE
* tE EFFO
* tA EFFA
* tD FDUR
* tS SHAC
* tP SHPO
* tZ SHSZ
* tT TITA
EXAMPLES OF ACTIONS:
ACTIONS RESPONSES
The device is in switching mode
(internal rate), the input#2 is selected.
The values are:
To select the Seamless mode on
computer #1, send 9XR
To select the title effect, send 2tE
To active the TITLE, select the
input#1 with the 1c command.
To select another input (input#3 for
example) send 3c
End of the transition.
To stop the TITLE, select the
input#1 with the 1c command.
CONTROLS COMMANDS
xu VERU
xi I
yo OPT
QE EPD
yl LOCK
yi EISP
LF LFAD
**
Lf LFD
at AFRA
br BFCR
bb BFCB
bg BFCG
yc EPOS
Y FRES
OTHERS COMMANDS
M STO
R REC
? DEV
# DEV......
NOTE: * = command available on the OCTO-FADE
** = command available on the OCTO-LOGO
COMMAND
DESCRIPTION
™
& OCTO-FX
Effect selection.
Effect available.
Fading duration (by 1/10s step).
Shadow title selection.
Vertical position of the Shadow.
Vertical size of the Shadow.
TITLE effect status.
Selected
input
CH
2
3
Device version.
Identification number.
Options available.
2:2 pull down correction.
Key locking.
Auto-lock
Transition mode.
Fade frame duration (0.1 second step).
Auto frame
Red level adjustment of the fade.
Bleu level adjustment of the fade.
Green level adjustment of the fade.
Erase memories.
DEFAULT VALUE.
Image parameters storing.
RECALL: Recall the image parameters. Rd/Wr
Device type.
Send all device parameters.
Chapter 9 : REMOTE CONTROL PROGRAMMER'S GUIDE (continued)
TYPE
MIN MAX
™
only)
Rd/Wr 0
Rd 0
Rd/Wr 0 255
Rd/Wr 0
Rd/Wr 0 255
Rd/Wr 0 255
Rd 0
Input Reference
selection input
ch REFA
2 0
9
1
2
3
1
3
0 65535 Example: 104 = Version 1.4
Rd
Rd 0 65535 Value displayed in hexadecimal in the device.
Rd 0 65535 0 = without option.
Rd/Wr 0
Rd/Wr 0
Rd/Wr 0
Rd/Wr 0
Rd/Wr 5
Rd/Wr 0
Rd/Wr 0 255
Rd/Wr 0 255
Rd/Wr 0 255
Rd/Wr 0
Rd/Wr 0
Rd/Wr 0
0
Rd 0 65535
Rd
™ ™
& OCTO-FX only.
™ ™
& OCTO-FX only.
VALUE
DESCRIPTION
2 0 = CUT 1 = FADE
1 0 = not available
1 0 = title without shadow 1 = title with shadow.
1 1 = TITLE effect in process.
Effect Effect
selection available
EFFO EFFA
0 0
1
2
1 0 = off
1 0 = unlocks
1 0 = off
0 = fade color
2 = Clean cut (from computer)
4
3 = Clean cut (from video)
4 = Clean cut (from all)
50 5 = 0.5 second
1 0 = OFF
1 1 = erase all memories (automatic reset).
1 1 = Default value action (automatic reset).
1 1 = STORE action (automatic reset).
1 1 = RECALL action (automatic reset).
18 = OCP802
21 = OLG802
22 = OFD802
23 = OFX802.
Rd = Read only command.
Rd/Wr = Read and write command.
2 = TITLE.
1 = available
Title effect Transition
status status
TITA TAKE
0 0
1
1
0
0
1 = voice-over option.
1 = auto.
1 = locks
1 = on.
1 = fade frame
50 = 5 seconds
1 = ON
25 = OCP802
PAGE 37