Safety Information - Heidolph REAX 20 Mode D'emploi

E

SAFETY INFORMATION

Please comply with all safety and accident-prevention regulations as in
force for laboratory work!
Use extra care when working with flammable substances; refer to
safety data sheets.
Use extra care when working in the vicinity of flammable and explosive
substances. Motors are of non-sparking type, the item itself however is
not explosion-proof.
When connecting your item with your local power supply, please make
sure your item is designed for your local voltage; go by the data plate
on the item.
Please connect your item with a protective-ground outlet only.
Turn your power switch OFF whenever the item is not used, or before
disconnecting the plug.
Repair work is limited to technicians approved by Heidolph
Instruments.
Your item needs a solid stand.
Lab bench needs to be of rigid design, and features an anti-skid surface
coat.
Before starting the item, make sure all samples are attached safely
(must not move while shaking).
The unit must be placed on a stable, flat, level surface. Allow sufficient
space
around the unit for safe operation.
Take care that the turning rotor cannot collide with anything else on the
laboratory table. Operating personnel have to be aware of the risk of
accidents and observe safety rules.
Before reactivating the Emergency Stop button turn main
switch to OFF.
Else rotation will start immediately
15