EUROM Heat and Beat Tower Manuel D'utilisation page 30

Check to ensure that the device has not been damaged. If everything is ok, you can
restart the device by:
Using the remote control to switch the device off and then on again
-
Switching it off and on again using the switch, and then selecting the desired
-
output using the reset button (remote control)
Switching the device off and on again with the app
-
Cleaning - maintenance - service
Cleaning
This appliance consist of a robust and maintenance-free aluminium casing with a
safety grill. Before cleaning remove the plug from the power outlet and wait until the
appliance is sufficiently cooled off. Wipe the appliance only with a clean and lint-free
cloth or a soft brush. Never use abrasive cleaners, scrubbing brushes and chemical
cleaners for cleaning! Never use flammable cleaners such as benzene or spiritus. Give
the appliance time to dry before you use it again. To protect against electrical shock
and danger of life, do not immerse cord, plug or any part of the appliance in water
or other liquid.
Maintenance
Inside the Eurom Heat and Beat infrared heater are no user serviceable parts. The
appliance is very good sealed (IP65) en may not be opened by not-qualified persons.
Service
Repairs must be carried out by authorised specialists (dealer or electrician), thus
ensuring electrical safety. The warranty does not cover damage or failure which are
the result of self-made reparations or alterations, accident, misuse, abuse, neglect
or improper maintenance. In line with their policy of continuous product development
we reserve the right to change the product and documentation specifications without
notice.
Removal
CE-declaration
See page 74.
In the EU this symbol indicates that this product may not be
disposed of as ordinary household waste. Old equipment contains
valuable materials, suitable for recycling. These materials should
be made suitable for reuse in order to prevent any adverse effects
to health and the environment caused by unregulated waste
collection. Therefore, please make sure that you bring old
equipment to a designated collection point. Alternatively, contact
the original supplier, who can make sure that as many of the
components as possible can be recycled.
30