EUROM Heat and Beat Tower Manuel D'utilisation page 29

- Set a timer that automatically switches the device off
- Adjusting the speaker volume
- Adjusting the colour and brightness of the LED lighting
- Set the sensitivity of the shock safeguard
- Set multiple heaters individually
- Protect your app control with a password
Turning on the speakers and establishing the Bluetooth
connection
Use the button on the remote control to turn on the
speakers
and Bluetooth connection for the Heat and Beat Tower (hold down for 4 seconds).
Before using for the first time, select the volume function of the Eurom Heat and Beat
(Eurom Beat) on your tablet or smartphone via Settings > Bluetooth. Now, when you
use your smartphone or tablet to play music (or news, a film, your phone etc) the
sound will come from the Eurom Heat and Beat Tower speakers. The Bluetooth
connection can cover a maximum distance of 20 metres.
Adjusting the colour and strength of the LED lighting
Use to turn on the LED lighting. The LED lighting is intended as atmospheric
lighting; adjust the light strength using the + and - keys on the app. You can also
use them to set a colour for the lighting and select constant light (smooth) or light
that flashes with the music (beat).
Safety features
Tipping Safequard
The Eurom Heat and Beat Tower is fitted with a tipping safeguard which automatically
shuts off the appliance if it inadvertently falls over. When the heater is returned to
its upright position, it does not resume its operating, but switch it off first with the
on/off switch (E), remove the plug from the socket and check the heater for damage.
In case of damage or malfunctioning do not use but offer for checking / repair. If
there is nog damage, you can simply switch the heater on again as instructed!
Shock safeguard
The Eurom Heat and Beat has the option of a shock safeguard that switches the
device off if it is shocked in any way. The shock safeguard can be activated with the
app and the sensitivity can then be set on a sliding scale. When the device is
supplied from the factory, the shock safeguard is off. Once the shock safeguard has
been activated, it can be operated via the remote control or manually. If the shock
safeguard has switched the device off, the red light at the reception point will blink.
29