Technical Data; Unpacking; Assembly - Scheppach RS350 Traduction Des Instructions D'origine

• Before you make any adjustments or maintenance
work, release the start button and pull out the pow-
er plug.
• Furthermore, despite all precautions having been
met, some non-obvious residual risks may still re-
main.
• Residual risks can be minimised if the "safety in-
structions" and the "Proper use" are observed
along with the whole of the operating instructions.
• Avoid accidental starting of the machine: the oper-
ating button may not be pressed when inserting the
plug in an outlet. Use the tool that is recommended
in this manual. In doing so, your machine provides
optimal performance.
• Keep your hands away from the work area when
the machine is in operation.
m WARNING! This electric tool generates an elec-
tromagnetic field during operation. This field can im-
pair active or passive medical implants under certain
conditions. In order to prevent the risk of serious or
deadly injuries, we recommend that persons with
medical implants consult with their physician and the
manufacturer of the medical implant prior to operat-
ing the electric tool.

6. Technical data

Dimensions
L x W x H mm
Sieve drum ø mm
Sieve drum length mm
Sieve drum
speed 1/min
Sieve drum adjustable to
Choice of grids mm
Performance approx.
m³/h
Weight kg
Drive
Motor V/Hz
Input capacity P1 W
Output capacity P2 W
Technical changes reserved!
Noise & vibration
m Warning: Noise can have serious effects on your
health. If the machine noise exceeds 85 dB (A),
please wear suitable hearing protection.
Noise data
Sound power level L 72,4 dB(A) (EN ISO 3744)
WA
Sound pressure level L 80,1 dB(A) (EN ISO 11201)
pA
Uncertainty K 3 dB(A)
wa/pA
Vibration parameters
Vibration a 2,5 m/s²
h
Uncertainty K 1,5 m/s²
h
18 | GB
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58
860 x 660 x 1440
400
800
42
0°, 4° and 8°
10/20
3
32
230/50
250
130

7. Unpacking

Open the packaging and carefully remove the device.
Remove the packaging material, as well as the pack-
aging and transport safety devices (if present).
Check whether the scope of delivery is complete.
Check the device and accessory parts for transport
damage. In the event of complaints the carrier must
be informed immediately. Later claims will not be rec-
ognised.
If possible, keep the packaging until the expiry of the
warranty period.
Familiarise yourself with the product by means of the
operating instructions before using for the first time.
With accessories as well as wearing parts and re-
placement parts use only original parts. Replacement
parts can be obtained from your dealer.
When ordering please provide our article number as
well as type and year of manufacture for your equip-
ment.
m
ATTENTION!
The device and packaging materials are not toys!
Children must not be allowed to play with plas-
tic bags, film and small parts! There is a risk of
swallowing and suffocation!

8. Assembly

m ATTENTION!
Always make sure the device is fully assembled
before commissioning!
Assembly tools
Allen key and flat spanner (not supplied)
For packaging reasons, your RS350 is not complete-
ly assembled.
Roller sieve, transport handles, Fig. 3
Attach the transport handles to the pre-assembled
roller sieve. For this, insert the handles into the sock-
ets provided and secure them against falling out with
the screw (A).
Wheels, Fig. 4
Attach the wheels to the frame bars (A). For this,
insert the screws (B) from the outside through the
wheels and the frame and secure them with the nut
(C).
When securing and tightening the hex-nuts, make
sure the wheels rotate smoothly.
Knob, Fig. 5
Fix the knob (A) to the thread of the angle adjustment
lock.