Introduction; Device Description; Scope Of Delivery; Proper Use - Scheppach RS350 Traduction Des Instructions D'origine

1. Introduction

Manufacturer:
scheppach
Fabrikation von Holzbearbeitungsmaschinen GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear customer,
We hope your new tool brings you much enjoyment
and success.
Note:
According to the applicable product liability laws, the
manufacturer of the device does not assume liability
for damages to the product or damages caused by
the product that occurs due to:
• Improper handling,
• Non-compliance of the operating instructions,
• Repairs by third parties, not by authorized service
technicians,
• Installation and replacement of non-original spare
parts,
• Application other than specified,
• A breakdown of the electrical system that occurs
due to the non-compliance of the electric regu-
lations and VDE regulations 0100, DIN 57113 /
VDE0113.
We recommend:
Read through the complete text in the operating in-
structions before installing and commissioning the
device.
The operating instructions are intended to help the
user to become familiar with the machine and take
advantage of its application possibilities in accord-
ance with the recommendations.
The operating instructions contain important informa-
tion on how to operate the machine safely, profes-
sionally and economically, how to avoid danger, cost-
ly repairs, reduce downtimes and how to increase
reliability and service life of the machine.
In addition to the safety regulations in the operating
instructions, you have to meet the applicable regu-
lations that apply for the operation of the machine in
your country.
Keep the operating instructions package with the
machine at all times and store it in a plastic cover to
protect it from dirt and moisture. Read the instruction
manual each time before operating the machine and
carefully follow its information.
The machine can only be operated by persons who
were instructed concerning the operation of the ma-
chine and who are informed about the associated
dangers. The minimum age requirement must be
complied with.
16 | GB
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58
In addition to the safety instructions contained in this
operating manual and the specific regulations of your
country, the technical rules generally accepted for the
operation of machines of the same type must be ob-
served.
We accept no liability for damage or accidents which
arise due to non-observance of these instructions
and the safety information.

2. Device description

1. Transport handles
2. Wheels
3. Knob/angle adjustment lock
4. Angle ratchet
5. Hydraulic damper
6. Motor
7. Motor belt cover
8. Protection mat
9. Brush bar
10. Sieve drum
11. Drum belt
12. Drum belt cover
13. Safety splint

3. Scope of delivery

• 1 rotary sieve, pre-assembled
• 2 transport handles
• 1 frame bars
• 2 wheels ø 180
• 1 knob
• Operating instructions

4. Proper use

The machine complies with the valid EC machine
guideline.
• The sieve has been built using modern technol-
ogy in accordance with recognized safety rules.
Some remaining hazards, however, may still exist
causing injuries to the operator or third persons,
or causing damage to the sieve or other objects.
• Only use the sieve in technically perfect condi-
tion, and only as authorized, being conscious of
the risks and following the instructions given in this
manual. Have any defects impairing your safety
repaired immediately.
• The roller sieve has been designed for sieving
compost, gar den soil, cloddy sand, or mixing dif-
ferent kinds of soil.
• Carefully observe the instructions regarding safety,
setting up, electrical installation, and maintenance.
• Relevant accident prevention regulations and oth-
er, generally recognized safety-technical rules
must also be adhered to.