Publicité
1
1
b
2
a
1
2
1
SLIDE RAIL SUSPENSION
ASSEMBLY
1. Apply:
• ESSO beacon 325 grease or Aeroshell
1
NOTE:
Apply grease to the bushings 1 and the shaft 2 in
the area a shown in the illustration.
b
b 5 ~ 15 mm (0.20 ~ 0.59 in)
2. Install:
• 2-up adjusting block 1 (RST90GT)
NOTE:
a
Install the lock lever guide plate 2 as shown in the
illustration so that the projection on the plate con-
tacts the projection a on the 2-up adjusting block.
Make sure that the 2-up adjusting block is locked in
place and the end b of the lock lever is sticking out
from the sliding frame.
b
3. Install:
• Front shock absorber 1 (RST90GT)
NOTE:
Install the front shock absorber with the charging
valve a facing towards the rear of the machine.
a
33
POWR
grease #7A (RSG90GT)
TR
Publicité
