Auto Mode - Canon DR-5020 Mode D'emploi

Chapter 3 Preparing Documents

Auto mode

Use the Auto mode to continuously scan a stack of same-size documents.
1
Press the Feeding Option key on the operation panel to light
[Auto].
2
Select the following settings on the operation panel.
This setup is not required if it has already been made in the application.
Text/Picture
[Text]: This is lighting, when scanning
the text documents (including
mostly characters) with black
and white mode.
[Picture]: This is lighting, when scanning
the picture documents including
photographs with black and
white error diffusion mode.
If any applications are set with gray scale
mode or color mode for the image
selection, either of above will not be
lighting.
For details on other setup parameters, see "3.3 Setting Scan Conditions." (P.58)
MEMO
46
Feeding Option key
A
Semi-Auto Auto Manual
Feeding Option
Count Only
New File
Simplex/Duplex
[Simplex]: Select this when scanning
only one side of the document.
[Duplex]: Select this when scanning
both sides of the document.
Brightness keys
Set the brightness when the document is
scanned.
To automatically adjust the brightness,
press A key to light A .
To manually adjust the brightness, press
or keys to move the indicator display
above the key and adjust the brightness.