Rear View - Canon DR-5020 Mode D'emploi

Chapter 1 About DR-5020/5080C

Rear view

Air vent
DIP switch
This switch is for setting the SCSI ID
and turning the terminator ON or OFF.
(P.25)
To avoid overheating and causing a fire, never block the air vents on the rear of the
scanner.
CAUTION
16
Power cord connector
Connect the power cord provided with
the scanner to this connector.
SCSI connectors
Connect the SCSI connectors to these connectors.
Connector shape: D-sub half-pitch 50-pin (pin type)