Connecting Chimneys - Sirius SU1 Notice D'utilisation Et D'entretien

fig. 8
Connect the appropriate length of duc-
ting to the fan exhaust point and join up
with the ducting to the exte-rior.
Figure 9 shows venting directly through
the wall. Venting up and through the cei-
ling to the exte-rior is also possible (refer
to Fig 10).
fig. 9
fig. 10
Do not fix the ducting to the range
hood exhaust outlet with screws-use
duct tape. Use duct tape on all joints.

Connecting Chimneys

Remove the protective covering from the
decorative chimney and carefully slide
the sections together. Do not remove
the tape strips from inside the chimney
as this protects the telescoping chim-
ney-piece from scratching. Holding the
two chimney sections together careful-
ly position them over the ductwork and
wiring. Position the upper chimney so
that it can be fixed via the holes on the
side of the 'Y" bracket on the ceiling (re-
fer to Figure 11).
9