Motor Housing; Accessories Of The Kneading Machine And; The Meat Grinder; Accessories Of The Mixer - Profi Cook PC-KM 1189 Mode D'emploi

WARNING:
• Never immerse the appliance in water for cleaning. It could
cause an electric shock or fire.
• The knives in the mixing bowl and the meat grinder are sharp!
There is a risk of injury! Proceed carefully when disassem-
bling, cleaning and assembling the individual parts.
CAUTION:
• Do not use wire brushes or other abrasive objects.
• Do not use any sharp or abrasive cleaning agents.

Motor Housing

For cleaning of the housing, only use a damp cloth and mild
detergents.

Accessories of the Kneading Machine and

the Meat Grinder

CAUTION:
The components are not suitable for cleaning in the
dishwasher. Under the influence of heat and strong deter-
gents, they could deform or discolour.
• Components that have come into contact with food, can
be cleaned in soapy water.
• Allow the parts to dry thoroughly before assembling the
appliance again.

Accessories of the Mixer

NOTE: Pre-Cleaning
Fill the mixing bowl halfway with water and turn on the
appliance for about 10 seconds. Empty out the liquid
afterwards.
WARNING: Risk of Injury!
The knives on the knife block are sharp. Be careful when
disassembling, cleaning, and assembling the individual
parts.
• To clean properly, remove the mixing vessel.
• Disassemble the mixing jug after each use.
• Unscrew the screw­on base from the mixing jug.
• Remove the knife block and the seal ring from the
screw-on base.
• The glass carafe of the mixing jug and the lid can be
cleaned in a warm rinsing bath. Rinse with pure water
and dry.
• Allow the parts to dry thoroughly before assembling the
appliance again.
PC-KM1189_IM
CAUTION:
Only operate the appliance if you have properly fitted the
knife block with the seal ring! Otherwise the mixing vessel
will not be sealed.

Storage

• Clean the appliance as described. Let the accessories
dry completely.
• We recommend that you keep the appliance in the
original packaging, if you do not want to use it for a
longer period.
• Always store the appliance out of reach of children in a
well ventilated, dry place.

Troubleshooting

Problem Possible Cause
The The appliance has
appliance no power supply.
is not
Your appliance
working.
is equipped with
safety switches.
They prevent
accidental starting
of the motor.
The overheating
protection has
been activated. The
motor is too hot.
The appliance is
defect.
Solution
Check the outlet with a
different appliance.
• Check correct
position of
- the swivel arm (5),
- the mixing vessel
(3) or
- the safety cover (4).
• Set the knob in the
position.
Then select the de-
sired speed setting.
Let the appliance
cool down for at least
15 minutes before
switching it on again.
Consult our service de-
partment or an expert.
59
23.07.19