Alarm Message; Activate The Alarm - Doro Secure 350 Guide Utilisateur

Alarm message

(AL.MESSAGE)
A pre-recorded message "This is an emergency call, to accept this
call, press zero." This message will be played unless you decide to
record your own message.
The alarm message should include your name, address, and how to
activate the speakerphone.
Example of an alarm message:
"This is an emergency call from John Smith on 10, Long Street,
Middleton. I require immediate assistance. Press zero to connect this
call." See AL.MESSAGE, p. 4

Activate the alarm

1. When the alarm button on the cordless pendant (or the alarm
button
button on the phone blinks continuously. The phone beeps loudly
for 15 seconds. During this time you can stop the procedure by
pressing any of the alarm buttons for more than three seconds.
Otherwise the alarm sequence will start:
2. The phone dials the first alarm number. Each alarm contact will
be called in succession, and the recipient will hear your recorded
alarm message. The most important number should have the first
alarm position (AL.POS?). Three call attempts are made on each
alarm number if nobody answers.
3. If the called party answers and accepts the call within 60 seconds
by pressing 0 (zero), the call is connected (in speakerphone
mode), and the alarm sequence stops.
If the call is not answered and accepted within 60 seconds, the
next number is dialled.
4. The phone is kept in speakerphone mode, unless the user presses
the speakerphone button or the cordless alarm button.
on the phone) is pressed for more than one second, the
English
how to record your own message.
14