Alarm Function - Doro Secure 350 Guide Utilisateur

5. Press
Note!
This deletes the Caller ID memory, not the Phonebook memory.
Transferring numbers to the Phonebook
1. Press .
2. Use v/V to select desired number.
3. Press and hold W for two seconds. A blinking cursor is displayed
in the first digit of the selected number.
4. Use v/V to move the cursor and
# to insert a pause in the number.
5. Press 0 to confirm. A blinking cursor is displayed in the first
letter of the name.
6. Use v/V to move the cursor and
7. Enter a name for the number to be stored (see
p. 8 ).
8. Press 0 to confirm.
9. See Phonebook, p. 9
The alarm function allows you to get immediate help from the contacts
stored as "alarm contacts" in the Phonebook.
IMPORTANT!
At least one alarm contact (ALARM ON) must be stored in the
Phonebook.
Always let your recipients know that you added them to your list
of "alarm contacts" and that they may be contacted in case of an
emergency.
An alarm call is only possible with the phone powered by the mains or
by the backup batteries.
until (two seconds) EMPTY is displayed.
on how to complete the contact.

Alarm function

English
to erase if needed. Use
to erase if needed.
13
Keypad characters,