Doro Secure 350 Guide Utilisateur page 29

QUIET AL.
In quiet alarm mode, no voice or tone signal is heard when the alarm
call is made (see above). See also
Use v/V to set the alarm mode to quiet (ON) or normal (OFF) and
confirm with 0.
AL.MESSAGE
Record the alarm message that will be played for the contacts stored
as "alarm contacts" in the Phonebook when activating the alarm
function. See also
Note!
The alarm message should include your name, address, and how to
activate the speakerphone.
Example: "This is an emergency call from John Smith on 10, Long
Street, Middleton. I require immediate assistance. Press zero to
connect this call."
1. Scroll to AL.MESSAGE.
2. Press and hold 0 to record a new alarm message (max. 30
seconds). Start recording at the tone, and release 0 when
finished. Speak clearly and about 15–20 cm from the keypad.
Alternatively, press 0 briefly to play the recorded alarm message.
3. Press 0 to confirm and continue.
RING LIGHT
To alert you to incoming calls, a flashing light can be activated when
the phone is ringing.
Select ON/OFF and confirm with 0.
CONTRAST
Select a suitable display contrast setting (1–4), and confirm with 0.
KEYTONE
Enable/disable the keytone beep.
Select ON/OFF and confirm with 0.
FLASH/Recall
Select the flash time (100/300/600 ms.) and confirm with 0.
English
Alarm function,
Alarm function,
p.13.
4
p.13.